자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Electric Fireplace Wall Hanging Ideas

In contrast to traditional wood or gas fireplaces Wall-mount electric fireplaces can be hung straight out of the box. They're ideal for adding the ambience without venting or remodeling.

They're usually heavy and require careful installation. Follow these steps to set up your new electric wall fires fire correctly.

1. Connect the Brackets

A wall-mounted electric fireplace or recessed electric fire instantly transforms any room. This is a great solution for those who don't have fireplaces or reside in apartments.

The first step is to decide where you'll put your new electric fire. It is important to choose an area that isn't vulnerable to moisture and is at least just a few inches from drapes, furniture, and areas that are prone to traffic. Once you've found a spot, mark the wall with markings for the top and bottom plates of the fireplace frame.

Use a drill or similar tool to make exploratory holes in the wall mounted electric fireplace. Check for studs using a stud-detector and mark the wall with the position of the brackets for mounting your fireplace. Next patch and paint the wall or make the wall a bit bigger to prepare it for fireplace installation.

Depending on the fireplace mounted to the wall you select, you might need to install both the screen and firebox in one piece or separate them using a wall bracket. If you are unsure of your capability to complete this task, hire a general contractor or a seasoned carpenter.

Most electric fireplaces include templates for the installation procedure, but you must also have a spirit level and pencil in hand to precisely mark the location where you'll attach the wall brackets. Before drilling, make use of the template to verify that the power cable of the fireplace can reach from the installation site to a nearby outlet for a convenient plug in.

Install the drywall as smooth and as flush as possible to give the fireplace a clean look. Add a piece of trim to the bottom edge and then paint and sand the entire frame to give it a finished appearance.

You will need to insert the slots or hooks on the back of most wall-mounted electric fireplaces into the brackets for mounting. Make sure you align the hooks or slots before connecting the brackets for your fire. Once the fire is placed you can add additional elements such as crystal embers or driftwood log pieces or decorative rocks.

2. Check the Bottom Bracket

The space above a fire mantel, chimney breast, or mantel is prime real estate to hang artwork. However, there is a line of distinction between an artistic arrangement and one that is distracting from the overall appearance of the fireplace design.

A general rule of thumb is that a picture should be at least 80% of the width of the fireplace or mantel it is placed over. This will help it remain proportionate and look aesthetically pleasing on the best wall hung electric fires. This rule of thumb could be affected by other ornaments or decorative items on the mantel.

If you're planning to hang an image above your electric fireplace, it's important that the frame is made from glass or another material that is able to withstand high temperatures. If you're unsure then a quick test using a heat-sensitive cloth should reveal whether the frame is suitable for this type of use.

The risk of damaging artwork due to smoke or hot stray heat is a typical concern when displaying pictures in front of the fireplace. This is not an issue with gas or wood-powered fireplace. However when you are planning to install an electric wall fire it is essential to follow the manufacturer's instructions.

The majority of electrical fires have an installation bracket that can be fixed to the wall using either hanging screws or wall-mounted fixing systems. If the latter option is used, it's recommended that you drill exploratory holes into an isolated area of the wall before you attempt to mount your electric fire. You can then utilize a pipe and cable finder to make sure there aren't any pipes or cables close to the location where you want to mount your fire.

If so, you can place your fire on the electrical socket or move it to a new location. If you decide to move it, you must make sure that the power cable can reach the electrical socket. This is crucial for older homes or those with walls that are solid. Otherwise the electric fire won't perform as it should. Some models include a template that shows you where to drill holes to make the holes Some require a spirit level & pencil to mark the appropriate locations on your wall.

3. Connect the Power Cord

If you've put in a recessed electric fireplace, you may need to move the plug socket from the wall to behind the fireplace. This will give you a sleeker finish. Be sure to test your fireplace prior to doing this to make sure that everything functions exactly as it should.

The third option to install an electric fireplace is by framing the space and constructing it into the wall. This creates a polished traditional look and also allows you to add a mantel. The owner's manual for your particular model will include information regarding framing, the securement of the fireplace, and wiring.

The location of your electric fireplace on the wall using a marker or pencil. Then you can use a carpenter's degree to make sure that the area of installation is level and flat. You can also employ a stud finder to mark the location of studs, so that you can be certain that you're drilling into a safe spot.

Make use of your electric drill after you've marked the installation location to make holes for bracket screws or hanging screws. Follow the directions in the owner's manual for this step. This is particularly important if you are installing the fireplace into drywall. If you are unsure how to proceed then you can ask a professional for help.

You can also hide power cords away from view using a cable organizer kit. These kits usually come with sleeves, clips or boxes for bundling cables. You can make use of wire snakes or fish tape to guide the cables. If you don't want to cut into the drywall, a powerbridge kit can provide a more secure and safer connection.

You can also disguise the cords with paintable wire covers or by adhering them to the wall or skirting boards. Make sure to keep the cover or tacks from the source of heat, however. This will protect the cord from damage and prevent accidental contact.

4. Connect the adapter

A wall-mounted electric fireplace is a great option for home renovations or for those without the space or funds to put in a gas fireplace. They are easy-to-hang and are ready to use straight out of the box. They are an ideal choice to those looking for an elegant, modern look or warmth from a fire. These units are designed to be hung like art on any wall, can be recessed or not recessed at all, and are fully electric wall fires with fan-powered heating.

Before beginning the actual installation process, it's an excellent idea to make a list of all the tools and equipment you'll require. Go through the user's manual for specific details about how to install your electric fire. Some models require you to screw brackets directly into the unusual wall mounted electric fires while others may feature an installation plate that slides into slots or hookeds on the brackets. It is essential to remove all combustible materials from the area in which you'll be installing a fireplace that is recessed. As a rule, you should keep these materials at least 3 feet from the front of the fireplace.

After you've inspected all the components, you need to plug in your electric fireplace and verify that it is working properly. This is a crucial step to ensure the flame effect screen and heater function as intended. This will give you an idea of the final product's final configuration.

Cover the cord once you are satisfied that it's functioning properly. This will keep the final product neat. This can be achieved by installing a new outlet that has an outlet cord that can be placed behind the unit. This will provide a seamless finish to your fireplace.