자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

Depending on how brand new your Subaru is, you may require the key fob programmed by an automotive or dealer locksmith. This is accomplished by connecting a computer programming machine to your car.

To program your Subaru begin by opening the driver's doors using the door button control and then shut it. You will hear a chime on the instrument panel and the dome lights will light up.

Step 1: Find the circuit board for your transmitter

There are several ways to program your keyfob. First, you must know which kind of key fob you own. This can be done by examining the shape of the key fob, or by listening for a sound in your car.

Once you have the necessary information, you can start the process of programming your key fob from home. You'll need flatheads and a metal key for this. You can open the key fob by twisting. Then push the key in and pull the battery from the small tabs that secure it. Replace the battery with a new one and put the key fob case back together.

Step 2: Unscrew the Key Fob Case

It is a good idea to change the batteries in key fobs in case they are not working. However, there are situations in which the buttons inside the key fob might be damaged. If you notice that the contacts made of metal on the button have become loose, try soldering them in place to allow them to function once more.

Make sure you turn off your ignition and close your doors before you begin. Close the driver's side doors and press the button 10 times in rapid succession. You should then hear the instrument panel chime and your dome light should flash. This indicates that you're ready to proceed.

Step 3: Insert the fob of the key into the ignition

There are lots of articles online that give you instructions on how to program a replacement or new Subaru key fob at home, but the majority of them aren't very specific. A professional auto dealer or locksmith in Fort Bliss is the best alternative for reprogramming a digital car key.

Sit in the driver's seat of your Subaru with the engine off and all doors closed. Open the door button control and use it to unlock all doors. Close and open the driver's door a second time. Inject and remove the ignition key (don't rotate it) 10 times over 40 seconds. The system will chirp to confirm that the settings have been modified.

Step 4 Step 4: Turn on the ignition

Before proceeding with this method of programming a key fob, it is important to keep in mind that this method only works with a functioning key already. If you do not then a dealer or auto locksmith will be required to program a brand new key for your Subaru in Fort Bliss.

Once your key has been programmed, you should be able start your car in about five minutes. To begin, make sure all doors are shut and the engine is off. Sit in the driver's chair and unlock the doors by pressing the button for the door. Put the key in the ignition and turn it off to the first position (the electrical systems will turn on, but the engine will remain off), and then back to the off position ten times in quick succession.

Step 5: Unlock the Driver's Door

subaru remote key replacement offers a wide range of high-end vehicles with key fobs that lock and unlock doors as well as start the car and defrost the windows. These devices can stop functioning.

Call a locksmith dealer to solve the issue. This will solve the issue and ensure that your vehicle is secure.

To do this, you must open the driver's door, then close it. Place the key into the ignition and then turn it back to position 1. Then, reverse it to the off position. Repeat this ten times one row as fast as you can. After ten times you will hear a sound.

Step 6 Step 6: Press the Lock/Unlock button on the Driver's Door

The procedure to replace the battery on a Subaru remote key fob is easy. The first step is to open the exterior fob casing. Use a flathead to pry the casing open inside and take out the old batteries.

After taking out the old battery, put in the new one and close the case. Sit in the driver's seat and then unlock all doors by using the door-button control. After that, put the key in the ignition and turn it to ensure that the electrical systems are switched on but the engine is off. Repeat this ten times in succession until you hear the chime on the instrument panel. This will put the system in programming mode.

Step 7 Step 7: Press the Lock/Unlock Button on the Passenger's Door

For some owners, the annoyance noise that occurs when locking and unlocking a Subaru key fob from outside the vehicle can be distracting. In some instances the chirp may be canceled by opening and closing all doors and a double-click of the lock button on the key fob.

Close all doors including the lid that holds the fuel, and switch off the ignition. For 10 seconds then press and hold the lock button on the key fob. The instrument panel emits a chime after this is done. The chime signals that the fuel-filler lid and door are locked. It is possible to change the setting so that doors lock automatically without having to push a switch.

Step 8 Step 8: Enter your Transmitter's 8-digit Number.

Keep the first 8 digits of the code in your head. Now, get in your driver's seat, shut all the doors and turn the key to the first position (towards towards). After ten turns your instrument panel will sound once.

Next, open the case for the key fob and find the circuit board of the transmitter inside. There will be two or three sets of numbers (8-digits) on the circuit board. Follow the directions in the guide to register the code. This may require visiting the dealer for older models.