자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they do not rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great amount of damage to your home, making it very dangerous and potentially fatal. It is essential to make sure that your windows are in good working order.

For single pane windows, it is relatively easy to replace them, and the replacement will usually fit inside the frame of the previous one easily. If windows with double glazed window repairs panes are held together by internal beading, it will be difficult to remove and replace the old panes. In this case it is essential to buy plastic spacers to help the new pane fit into the window frame.

If you are going to try to remove the window panes by yourself it is important to wear the appropriate safety equipment such as gloves that are thick and protective eyewear. It is also recommended to lay down a drop cloth prior to when you start working on the glass to ensure that any shards fall onto the cloth instead of landing on the floor, where they could be trampled on and cause further damage.

Once the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to stop water and drafts from entering the home until a professional is able to come out and repair the window. It also acts as a barrier, preventing any intruders from getting access to your home. If the gap is large, you might think about an alarm door Window repair that comes with an integrated window, as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can be affected by a variety of issues such as sagging. A sagging window in uPVC could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from worsening.

To repair a window that is sagging, you can try to reposition the hinges. First, you'll need to unblock the windows to get at the frame. Then, you can remove the top and bottom hinges using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after you've repositioned your hinges. If you're satisfied with the fit of the window, you can tighten screws to hold them in the right position.

If you are unable to move the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and become dry, which causes them to loosen. It is essential to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles could also loosen. The majority of the time, this is caused by screws that have come loose over time. However, it can also happen because the handle mechanism has worn out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. First, you'll need close the window and then perform a test to ensure that it fits. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn't then you can make use of a screwdriver to loosen the handle and turn the mechanism back into position.

3. Water Leaks

It is essential to take action if wake up every morning to find mouldy walls and wet floors. Water leaks through windows can cause structural damage to your home and also affect your ability to regulate the temperature in your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix that can be done by any DIY expert. Depending on the severity of the issue is, the old caulking might need to be removed. It is important to keep in mind that when it comes to uPVC window repairs you should not be tempted to 'over-caulk' as this will only make the area harder to clean and decrease the efficiency of your energy usage.

Check that any drainage holes do not have debris in them and ensure that the sill pan is angled correctly to drain away from the window. In more severe cases, you may need to replace the window.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can quickly spread throughout the house.

If the leakage occurs between the double-glazed glass it is more likely the issue is related to the seal, not the frame. It is also possible to be repaired by a uPVC window repair expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open, or if it blows open with the breeze. They can be easily repaired by any DIYer who is skilled and can usually be completed in a matter of minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that are hinged and, just like any mechanical component they can wear down over time. The process of replacing a hinge on a window is essentially a simple procedure, but it is easier to do if you have someone to help hold the frame up.

It is also worth checking that the uPVC hinges are opened and closed in the right direction. You can check this by checking for the arrows on each hinge. This indicates which way the window should open.

The issue can be caused either due to opening the window in the wrong way or a faulty installation at the factory. Sending us photos via our website will often resolve the problem. We are happy to offer advice.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant on the hinges is a good method to accomplish this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also reduce the chance of windows getting stuck and stop corrosion. Ideally, you should do this once a year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. The hinges can also be misaligned due to wear, causing an opening where the sash meets frame. If they're beyond repair, it could be required to realign them. In addition, the interlock could also become disaligned. It is located on the hinge's side and could require to be cleaned. In some instances, it may be necessary to replace these.

The next most common reason for draughts is window seals. They can become worn down or damaged over time, and allow air to escape through the gaps. Replacement of these with high-quality weatherstripping is a good way to stop draughts. Replace the upvc windows with low-emissivity lenses. This will help control indoor temperatures, and reduce the risk of draughts.

Another method of reducing drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be hung over your window sill. These will help to stop cold air from entering and keep your home warm and cosy!

The windows made of upvc can keep providing excellent insulation and security in your home with regular maintenance and repairs. It is important to remember that all windows eventually wear out and it is more cost-effective to replace them instead of fixing them. If you encounter any issues with your window made of upvc, it's best to consult an expert as soon as possible.