자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Maintain a Woodburning Stove

A wood-burning stove is a reliable, effective way to heat the home. But, it's essential to maintain your stove in order to ensure the best performance.

Tips: Choose wood that is seasoned that has a low content of moisture. This will let you use the wood longer and Www.913875.Xyz generate more heat.

The state environmental agencies are struggling to find a solution for the problem of particulate pollution caused by old wood-burning stoves.

How They Work

As the name suggests woodburning stoves burn wood in order to generate heat. The fire is contained within an aluminum and glass body that assists in maintaining a constant temperature in the home. It also acts as a barrier to smoke entering the living area.

Stoves regulate combustion by regulating the amount of oxygen they let into the fire. This is done through one or more controllable air vents that can be closed and opened to control the amount of oxygen flowing in to the fire.

Modern stoves employ non-catalytical or catalytical technologies to regulate this. Catalytic stoves have catalytic converters that are designed to reburn the gases generated during primary combustion so that they do not escape into the room. Non-catalytic stoves on the contrary, do not have a catalyst and rely on secondary combustion to take place inside the firebox to reduce emissions.

It is recommended to only burn firewood that is seasoned in your woodburning fireplace. This means that it should have a moisture content of less than 20 percent which allows the fire to burn more efficiently. This will help reduce the amount of smoke and harmful pollution from the flue system and will make the glass inside your stove less prone to become blackened due to creosote which is a byproduct of burning wood that can build up over time.

The use of seasoned wood will lower emissions and help you save money on heating bills. It produces more heat per unit of fuel. This is because the surface area of dry wood is greater and produces more heat per volume.

Smoke from wood can be harmful to anyone, but it is particularly harmful to children and older adults with vulnerable lungs. It can also cause irritation to those with lung conditions like asthma or chronic obstructive respiratory disorder (COPD). If you reside in a designated smoke-control zone, make sure that your stove is properly maintained. It should also be installed with a chimney that meets the standards of the area.

Burning Wood

Woodburning stoves are a green and renewable source of heat. They can be used to keep your home warm during an power outage. They also reduce carbon dioxide emissions from fossil fuels like gas and oil, which are harmful to the environment.

Modern woodburning stoves operate more efficiently than older models and are designed to stop the build-up of creosote, but it is still important to monitor the combustion process. Creosote can be a dangerous byproduct of a poorly burned fire and can block the chimney if allowed to build up, leading to less efficiency and creating the risk of a fire. Using seasoned logs will keep creosote low and will save you money on logs. It also helps you avoid having to hire a professional to clean your chimney.

You can also choose stoves that burn wood and coal which gives you a choice between carbon-neutral energy sources. However, www.913875.Xyz it is important to keep in mind that coal is not a green fuel and there are concerns regarding the manner in which it is mined and www.913875.Xyz transported.

It is recommended to choose a Defra approved stove and ideally one that is also Ecodesign ready, since they are in line with the most current emission regulations. The UK building regulations define the kind of flue used as well as the size of the hearth and the distance between the stove and the combustible material. It is always best to speak with our stove experts prior to purchasing an appliance.

Paper and other combustibles such as rubbish and paper should not be placed in woodburning appliances. They can contribute to pollution and, in the worst case an explosion in the chimney. At the very least, they cause them to be less efficient. Other combustibles have less density than firewood, and thus will burn at lower temperatures and produce more particles.

It is important to only use properly seasoned, split and dried firewood. This will help the wood burn more efficiently. Dry or damp wood generates more smoke and pollutants. It is recommended to also use a stove pipe of high-quality to ensure that the temperature of the flue are adequate and that it is installed correctly.

Emissions

Woodburning stoves release a range of gases and particles. Mostly they produce fine particulate matter (PM2.5) that is tiny enough to enter the lungs and penetrate into the bloodstream, potentially damaging the liver, heart and brain. However they also produce carbon monoxide, nitrogen oxides and carcinogenic substances like polycyclic aromatic hydrocarbons, also known as PAHs. Based on the type of fuel they are burning, some release toxic metals, such as mercury and arsenic.

There have been a variety of attempts in the US to regulate the amount wood-burning stoves produce pollution, 913875 with varying degrees success. In 1988, the Environmental Protection Agency set emissions guidelines that basically limited the amount of pollution that new stoves could emit. Since since then, there's been two changes to the regulations. The latest one in 2015 requires that all stoves catalytic or non-catalytic emit no more than 4 grams of pollution every hour.

These strict regulations led to a major shake-up of the industry, forcing hundreds of smaller manufacturers out of business. However they also spurred the development of efficient stoves that could last and could produce lower emissions than conventional models. To improve their products, stove makers looked at and analysed combustion flow baffles, combustion chamber shapes. They also studied the insulation materials and Recirculation systems. Over time they succeeded.

The moisture content of the wood is an important factor in determining the emission. The more moisture content, the more emissions a stove can produce. The best method to cut down on the amount of emissions is making use of seasoned firewood that is properly dried over a period of 6-8 months.

According to numerous studies which compare the impact of exhaust-related particles only, a woodburning stove can cause as much particle pollution as 15 diesel vehicles. These tests were not scientifically based. These studies don't consider that the majority of pollution that cars emit comes from its engine, brakes, and tyres, not its exhaust.

Ten blue states have been pressing on the EPA to review its carbon emissions and guidelines for air quality of wood-burning stoves. Attorneys general from New York, Washington and Illinois have announced that they will sue EPA for continuing to allow high-emitting wood-burning stoves to continue to be sold in homes across the country.

Maintenance

Although wood-burning stoves are extremely efficient in heating homes but they can be difficult to maintain. To ensure that your stove is clean and functioning properly, you will need to clean it frequently. A dirty stove could affect the health of the people who live there and the amount of heat it produces. Cleaning the stove isn't the only maintenance task that needs to be carried out to keep it running smoothly.

Cleaning the interior and exterior of a stove is simple to do. It is recommended to clean the stove every week or on a fortnightly basis based on the frequency it is used. It is also recommended to empty ash from the fire box every time the stove has been used. Spread newspaper on the floor, and wear gloves when taking out the ashes. It is also recommended to make use of a metal ash container rather than a bucket, since this will help prevent rust.

Keeping the flue and chimney clean is also important. A chimney sweep professional should be employed at least once or twice per year to clean the stove and chimney thoroughly. This will help prevent the buildup of creosote and lower the risk of chimney fires.

A chimney must be examined for cracks in the flue liner as well as the masonry as well as creosote deposits excessively, bird nests, and other debris. A professional chimney sweep can fix these issues and restore a safe and working chimney.

Finally, the glass of a wood burning stove may become smudged and cloudy as soot builds up over time. A mixture of ammonia and water can be sprayed on the glass, then wiped with a cloth until it is clean. It is advised to avoid scratching the glass since it can weaken the glass and shatter it when it is hot.

If the paint on a woodburning stove begins to crack it is easily repainted with a quality heat resistant paint. These paints are generally found at stores where wood stoves are sold and can be found in various colors.