자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Guard your precious possessions against theft with the Ghost Immobiliser. It is discreet and does not require any additional key fobs.

The device makes use of the buttons on your vehicle (steering wheel doors, door panels, and the centre console) to create a unique pin code sequence of up to 20 presses. This then authorizes the vehicle to start.

Simple PIN Code Change Process

With the growing rate of vehicle thefts, many owners are looking to improve their security. There are a variety of security products that are available for sale including tracking systems, alarms and immobilisers. However there are a few that are equally effective in protecting your car. While a tracking device can assist you in locating your car in the event of theft, it does not stop the crime from happening in the first in the first place. Immobilisers, on the contrary does exactly what it says on the tin: it shuts down your car's engine so that it cannot be started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it nearly impossible for thieves to steal your vehicle.

By using the buttons that are already present in your car, the ghost 11 immobiliser device creates an unique sequence that must be entered before the engine will start. This can be done via the indicator stalk, window or heater buttons. There is also a mobile app that can be used as an emergency PIN override, allowing the driver to operate their car without the button sequence. This is a great solution when you wish to donate your car to valet parking or for servicing. The immobiliser will remain active.

The ghost installation near me is a unique and ingenious device that works in conjunction with the buttons on your vehicle instead of being a separate unit. This means that it's not only a highly effective protection against theft of your vehicle, but also a transferable device over to any future cars you own, making it more investment-wise than the traditional lock on your steering wheel.

Small, weatherproof device

The Autowatch ghost immobiliser is an advanced security system that guards your vehicle from key cloning, hacking & ECU swapping. It's a weatherproof and small device that connects directly to your vehicle's ECU via the CAN data bus, which disables the engine. It can be plugged into the vehicle without wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices that are a popular technique that car thieves use to get around immobilisers.

The benefit of using CAN data is that it operates in a silent manner compared to traditional systems. It can't be detected by sophisticated RF scanning or code-grabbing technologies and is also undetectable by conventional diagnostic tools. The Autowatch ferrari ghost installer doesn't emit LEDs, but instead utilizes the buttons in your vehicle like the steering wheel or centre console panels to create a unique, changeable disarm sequence. You can even make this sequence as long as 20 presses for added security. The iPhone app permits one, authorized connection using the pairing code unique to the Ghost and the communication between the two is secured.

The Ghost also prevents car thieves from using an additional key or replacing the ECU to bypass the immobiliser and begin the engine. It will only allow the engine to start when the correct PIN code is entered. It can be temporarily operated in valet or service mode (with parameters set, such as a 30mph speed limit) and, therefore, you can offer your vehicle to an attendant or valet without having to enter an entry code.

Each vehicle is tested

The Autowatch ghost immobiliser installation is the first aftermarket immobiliser on the CAN bus that connects to the existing wiring in your vehicle and connects to your engine control unit (ECU). The device intercepts electronic signals that block your car's system from going through its normal startup routine until you input the passcode you have created. The system can be turned on or off via your smartphone's app without the need for additional wires.

The standard factory immobilisers function by using a transponder that is built into the key. It transmits a message to the ECU. The car will start if the correct code is transmitted. However, if the transponder of a different vehicle is used instead, the immobiliser doesn't recognize it. This allows the vehicle be started and stolen. The Ghost immobiliser was created by an South African company at the forefront of vehicle security systems technology. It shields your vehicle from key cloning, hacking and even key theft. Only by physically towing your car away can thieves get it, and they would still not be able drive it.

Ghost uses the buttons in your car, such as the indicator stalk, steering wheel and door panels to create an unique PIN code that is changeable that needs to be entered before you can drive. This is performed without the need for extra hardware such as key fobs and can be as long as 20 presses long. It is also inaccessible to diagnostic equipment and doesn't transmit radio frequency signals, which means thieves are not able to make use of sophisticated RF scanning or code grabbing technology to determine if a security system has been installed.

Unlike physical anti-theft devices like clamps or wheel locks, auto ghost immobiliser is covertly integrated into the vehicle so it can't be removed or disabled by thieves and is even more difficult to get rid of than a car alarm, which requires disarming with a button sequence. This makes it an excellent alternative to a GPS tracker, which can help locate your vehicle after it has been stolen.

Emergency PIN code override

You don't have to look too far on social media sites to find stories or even videos of vehicles that were stolen by car thieves employing the most advanced technology tools available to them. This includes key-cloning devices and hacking tools that allow them to start the vehicle with your original keys.

Our Ghost immobiliser combats this and provides you with an additional layer of security to prevent your vehicle from being taken when it is targeted by thieves. It creates a unique pin code by pressing the buttons on your steering wheel, door panel and the centre console. The unique pin code must be entered along with your original key fob in order to stop the vehicle from starting. The unique override PIN is on the black card that you will receive after installation. It's easy to remember as there are no LED indicators.

The device is hidden in the vehicle's wiring and does not emit radio signals. Therefore, it cannot be detected by diagnostic software that can tell what type of security systems you have installed. This makes it a fantastic alternative to the tracker.

In contrast to other security systems that rely on a relay located in the engine bays, these immobilisers CANBUS communicate through CAN databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to disable the vehicle completely by sending a digital block to the ECU and engine.

These systems can also be linked to an analog alarm immobiliser, tracker or alarm. This should be decided prior to the installation. They are also service/valet mode-compatible and a good alternative to a tracker you have your car checked for repair at the dealer.

Service/Valet Mode

In recent times, there has seen an increase in the number of cars being stolen without the owners keys. It's now easier than ever before to take your joy and pride thanks to the availability of key cloning tools & door lock picks. To stop this, we now offer the Autowatch Ghost immobiliser that prevents your car from being driven even if your keys were cloned or your car was stolen.

It directly communicates with your vehicle's ECU (Engine Control Unit) through the CAN data circuit. It's completely silent since it doesn't use radio frequency or a key fob. This means it isn't detected by diagnostics or other vehicle hacking devices. It also prevents you from adding a new ECU or key to bypass the system, because only the PIN number allows the engine to start.

The device is hidden in your car and is accessed by existing buttons on your steering wheel, center console and door panels. A unique and reversible PIN code sequence of up to 20 digits has to be entered before you are able to start your vehicle.

This is the first aftermarket immobiliser CAN bus that has been developed that can prevent your car from being driven away or started without a PIN code being entered before. If you are driving away with the device arming it will display an indicator on your dashboard and flash continuously for about 300m. Entering your PIN code will turn off the anti-hijack. Your car will continue to function normally. If you don't enter your PIN at this time the indicator will continue to flash and will require a new PIN every time you attempt to start your car.