자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Add Warmth to Your Home With a Fireplace Wall Mount

A fireplace wall mount can bring warmth and ambiance any room, whether in your home, office, or commercial space. These wall mounts are typically easy to install and include mounting brackets to hang or recessing into a wall.

Follow the instructions on the website of the manufacturer for a quick and easy installation. Verify that the wall-mounting bracket and the bottom of the fireplace fit together, and then attach it to the wall.

Size

A wall mount electric fireplace insert can create an amazing focal point to a room, bringing in ambiance and warmth. These fireplaces are available in a variety of sizes that can be customized to fit any space. A smaller model is perfect for bedrooms, whereas larger models can be placed in a living or family room. Some models also come with a recessed option for installing them on the wall in a way that they are flush to give an uncluttered appearance.

The height of a fireplace wall mount can influence the way it appears within the room. To create a dramatic effect, many people choose to put them higher on the wall, usually 6 to 12 inches off the ground. Some people prefer to put the TVs at the standard height of 4.5-5 feet. This allows them to be seen by the majority of people sitting in the room.

No matter what size you decide to go with, it is important to remember certain factors to ensure your fireplace is secure and efficient. Keep all combustibles within three feet from the fireplace including furniture, drapes, and other things. Additionally, you must make sure that the mounting brackets are securely attached to the studs, if they are. If you are unable to locate studs, you can use plastic anchors. This will ensure that the fireplace won't be pulled away.

When selecting a fireplace mount, it's crucial to think about the amount of heat it creates. As a rule, choose a model which produces approximately the same amount as an average electric heater. This will ensure that your fireplace can provide enough heat to the entire space.

Certain fireplaces come with specific features that make them stand out from competitors. For instance, some fireplaces come with remote control operation, adjustable brightness settings, and no-heat modes. They also come with cool-to-the-touch glass and realistic LED flames. Other noteworthy features include a built-in shelf that can be used to store electronic devices and a simple installation process that doesn't require any expert help.

Installation

Unlike a built-in electric fire that requires hard wiring into the electrical system of your home, a fireplace wall mount is semi-permanent. It can be mounted directly on the wall or in a bracket that is then fixed to the wall. It is essential to select an area that is close enough to an electrical outlet to allow the power cord to reach, while giving enough clearance to other objects in line with the recommendations of the manufacturer in the manual for your owner.

Before you begin the installation process, make sure that your fireplace is in working condition by plugging it into and playing with its LED lights and heat settings. This will inform you whether it is ready for the installation or if it needs to be checked further.

Next, prepare the area in which you'll be installing your fireplace wall mount. Depending on the model, you might require a bump-out on the wall. Or, you might want to cover the wall in drywall. In the latter scenario ensure that you employ appropriate techniques for drywall, like mudding and taping, allowing it to completely dry before continuing.

After the walls have been prepared, attach the brackets to the wall using screws. It is recommended that they be placed into the studs that are behind the drywall. This will stop the fireplace from pulling loose from the wall later on.

When the bracket is secured, it's now time to put the fireplace in itself. The model can vary, but there will usually be a ledge where the fireplace rests and a spot to attach the bracket to. You can then add any additional media, like logs or embers.

Additionally, some models permit you to fit the firebox and screen as a unit to the wall bracket. This can make installation much easier however, you must make sure that everything is secured and fits properly prior to finishing.

After the fireplace has been installed, you can complete the look by either fixing the bracket to the wall and trimming the wires that aren't needed. You could also think about using paintable wire covers to camouflage the power cord if desired.

Safety

A fireplace wall mount allows you to heat your home while saving valuable floor space. However, it is important to be aware of safety precautions when using this kind of fireplace. The first step is to ensure that the fireplace is grounded to avoid electric shock. Be sure to read the instructions provided by the manufacturer for proper usage.

It is possible to purchase wall-mounted electric fireplaces wooden fireplaces (more about Bloggazzo) that don't produce heat, but the majority of them include an element of heating to enhance the realistic nature of the flame effects. It usually takes the form of a fan-forced heating device that blasts air through a heating element but some models may include an infrared heater too.

After the fireplace has been installed, you should be careful not to touch the hot surface, as this can cause burns and damage the appliance. To minimize the chance of a fire, keep combustibles at least three feet away from the fireplace. Be careful not to block vents on the back of the fireplace.

When you are choosing an electric wall-mounted fireplace, there are some additional safety features you should consider. For instance, you must ensure that the fireplace comes with an emergency shut-off feature to prevent overheating and fires. It is also a good option to select a model that produces a lesser amount of heat, as it will help you save energy.

The material of the surround is also important. You should select an option that is safe for children as well as pets, such as steel, glass, or wood veneers. Additionally, you should choose a model with a display panel or remote control to enable you to operate it effortlessly.

There are many different kinds of ethanol fire and electric wall-mounted fireplaces. The ideal fireplace for you will depend on your budget and home's style. You can be certain to add warmth and elegance in your home, no matter if you select an electric or ethanol fireplace. However, you should always follow the safety guidelines provided by the manufacturer and keep your family, friends and pets secure when using this fireplace.

Style

The design of the fireplace wall mount determines the way it appears on your home's walls. Certain models are designed to stand out, while others blend into the décor of your home. For instance, a contemporary model such as the Streamlined wall-mount electric firesuite fireplace comes with a sleek front glass face and a minimalist profile. It has top venting which allows heated air to circulate smoothly while maintaining the fireplace’s stylish design. Its flat-mounted design and easy-to operate remote make it easy to operate.

There are also wall-mounted electric fireplaces with mantels that are more traditional in appearance. These are great for homes with an open hearth, or who wish to transform their wood-burning fireplace into an electric fire without a chimney. These fireplaces with flat walls are available in a variety of dimensions, and often come with a shelf for display decorations. These fireplaces are ideal for bedrooms, living rooms and even home offices.

A gas wall-mounted fireplace is another excellent option for those looking to add a warm, inviting vibe to their home. These units have a traditional log set and are available in several different frame styles such as black and natural stone. They also have a customizable ember bed and LED flame color options for personalization. Some models come with an integrated TV mount that can be used for additional functionality.

Certain models are designed to be mounted directly on the wall, while others can be recessed or completely into walls. The Allusion wall-mount fireplace is small in size, which allows it to be recessed into frame walls of 2x6. But, you can add a trim skirt to the exposed portion. The Allusion also comes with a handy remote control and multiple heating settings, so you can enjoy your fireplace throughout the year.

Surface-mounted electric fireplaces typically project 4" to 6.5" into the room, which makes them easier to install than models that are recessed into the wall or constructed from an existing wall cavity. They're also a great option for renters who don't want to endure the hassle of drilling into their walls. You can easily remove or reposition the fireplace when you move.