자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Patio Door Lock Repairs

Over time, wear and tear can cause lock malfunctions. There are a few easy steps you can take to ensure the security of your uPVC door.

If it's resetting the lock or cleaning the mechanism for locking these simple fixes will increase the security of your home.

Clean the Lock

While patio doors are an excellent way to bring the outside in and keep out the elements however, they can also pose an issue for security when your lock isn't functioning as it should. Over time, wear and tear, cold and hot weather dirt, and other debris can cause your patio door lock to become difficult to operate. With a little care you can ensure that the lock on your patio door always functions correctly.

It is important to first clean the patio door lock and all moving parts. This will help remove any dirt and coatings that may be preventing the lock from working as it should. Begin by wiping down all the moving parts on your patio door lock using a damp cloth. Then, use a scouring cloth or a rough damp cloth to scrub the areas that are soiled of the door and frame. It is recommended to wipe the entire lock with a dry cloth to remove any remaining dampness and allow it to air dry before applying it to the next time.

If you have an outdoor door that has a pin tumbler latch mechanism it is possible to grease the lock by applying powdered graphite to the key or applying an lubricant based on Teflon like WD-40 Multi-Use. This kind of lubricant is easy to apply and doesn't break down as time passes. If you're unable find the right lubricant for your lock, you can apply a pencil that has a more of a thicker tip. Place the pencil in the lock and move it around to spread the graphite.

Sliding patio door tracks also require regular maintenance to ensure they're free of dust, dirt and other debris. They are particularly susceptible to snow, ice and other debris, which can cause them jam or bind. This could make it difficult for your patio sliding doors repair door to open and close.

The sliding rails of the patio door track and rollers can be cleaned by removing any dirty or damaged weather stripping, cleaning them, then replacing it. The same can be done to patio door rollers which can be cleaned and sprayed with a non-stick lubricant that will allow them to move freely.

Lubricate the moving parts

uPVC french doors, similar to sliding patio doors repair patio doors, work using 3-4 or sometimes 5-point locking mechanisms that include the lock cylinder and handle operated by keys. These doors require maintenance, lubrication of the moving parts. This can be done using a thin oil (never WD40) and should be done once per year.

If hinges that are sagging aren't the cause, the door could be skewed and catch or rubbing against the strike plate's hole in the frame. The solution is to take off the strike plate and use an abrasive chisel to increase the size of the mortise that it rests in. This will allow the latch to fit into the hole and also prevent it from rubbing against the frame.

Take a measurement of the width of the cylinder with a piece of book or wood patio door repair that is able to fit into the space above the adjustment screw. The outer dimension is measured from the outside of door to the center cylinder. The inner dimension is measured from the center adjustment screw until the end cylinder.

Check the width of the lock.

If your patio door latch is difficult to turn even after cleaning and lubricating, it's possible that it's not in alignment with the strike plate hole. Check to see if the door is balanced and whether the hinge screws are tight however, in many instances it is possible to move the strike plate up or down can fix the issue.

The latch may not be able to engage properly in the event that the strike of the lock is not large enough. In this instance you'll have to increase the hole with the hammer or chisel and then test the latch to make sure that it is able to engage the strike plate without rubbing against or getting caught on the frame of the door jamb.

Before buying a replacement lock, first determine the mortise type of lock you currently have. You can do this by looking at the faceplate on the lock and noting if it is square or round. Examine each screw hole on the current lock and note the size. This information will help you find an alternative that is of the same size and will fit perfectly into your existing hole.

You'll want to identify the mortise lock, and then examine it for bends, scratches or other damage that need to be repaired. A damaged or bent latch is more prone to break than one that's been frequently used, so be sure to replace the lock with a new, secure version if you find any signs of damage or wear.

Once you've inspected the lock and determined which type of replacement you need now is the time to start working on the actual repair. The old handle and spindle must be removed from the doorway to the patio doors repairs. Introduce the new handle. Start by putting in the interior handle and aligning it with the spindle, and then securing it by using the two bolts or screws that secure it. Install the exterior handle following the interior handle. After you've completed these steps, you can test the new handles to ensure that they are able to open and close with ease and that the latch is catching correctly when you strike the plate.

Check the door's Strike

The door latch and strike plate are the two parts of the lock that work to ensure that the latch is secure the door. A misaligned strike plate or door latches will cause the latch to not latch the door properly. Fortunately, this issue is usually easy to correct.

First, examine the strike plate's receiving holes to ensure that they are free of obstructions like dirt or plastic plugs. Loosen the keeper screws holding the strike plate in position. This will allow it to move vertically but it will not be able to separate from the frame. Then adjust the strike plate to ensure that its receiving holes align with the latch hooks on the door latch. After the strike plate has been adjusted, tighten the screws and test the door to see if it shuts smoothly with the new adjustment.

These plates are difficult to reach for homeowners who have sliding patio doors. However they are crucial to secure and unlock your door. The plates made of metal are located at the top and bottom jambs of the door where they serve as the support for the latch. The door latch is inserted into the strike plate and forms a seal. If the strike plate is damaged, rusted, or not installed correctly, it can hinder the latch from locking the door securely.

A misalignment between the latch and strike plate is one common cause for the patio lock to not close or stick. The easiest method to check for this is with the "lipstick test." Rub some lipstick on the outside of the deadbolt, and then apply masking tape over it. When you close the door, the lipstick will leave a mark on the tape that will show exactly where the latch connects to the strike plate. If the mark is too high or low you can alter the strike plate.

The sliding patio door locks keep your home safe from intruders, and if they're not working correctly, you must solve the issue fast. If you follow these steps, you can repair the lock on your patio door repair service door and get it back to normal within a short time.