자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

For darters, having all of the dart's mass concentrated between the fingertips, enhancies control of the dart. Some darters, especially old-timers, like the grip of these darts as the metal surface develops microscopic pits after they have been thrown for awhile. Unfortunately, it is so soft that the machined "grip" may quickly wear down, changing the "feel" of the dart. This means smaller diameter barrels, better "feel", and tighter possible groups on the dart-board. Look for the percentage of tungsten on the packaging, a higher number means that the dart is more dense, and generally better quality. Copper tungsten darts have become much less common in recent years, with Nickel/Tungsten darts becoming the primary type of high-density darts. This is a much softer material, with about 70% Tungsten content. Tungsten darts are therefore more dense than Brass or Nickel/Silver Darts. However, Nickel/Silver is harder and therefore more durable, which prevents the machined grip from wearing away as rapidly.

Tungsten is also very durable, and the machined grip will not wear down as rapidly as on Brass or Nickel/Silver Darts. These are excellent shafts, quite durable, and will not vibrate loose as easily as solid aluminum shafts. Composite type shafts, like the Alamo or Quiver, have plastic bases that thread into the dart, combined with aluminum or other metal alloy tops that hold the flight. The stiffness varies according to the weight and type of fabric used by the manufacturer, 10 ball billiards rules but is roughly midway between Soft and Hard flights. Hard Flights were originally made of a clear plastic, which resulted in fairly dull colors in printed designs. Flights only resist motion away from the centerline of the dart. A variety of shaft styles are now available, that allow the flight to turn out of the way when struck by another dart. The most common point of wear with this flight is at the front, where it is inserted into the shaft. Since ripstop nylon fabric is a thicker material, it is important to pry open the slots on the shaft for a properly loose fit to avoid damage to the flight.

When used with thick flights, such as Dimplex or Nylon, the slots may need to be pried open slightly, with a dart tool or knife blade. NYLON FLIGHTS, made of ripstop nylon fabric, ar by far the most durable type of flight. Then, each team sets up its five kubbs, placing them at even intervals at the far ends of the pitch, on the baselines between the corner pins. If your hand ends up towards the floor or ceiling, that is where the paint would have gone! The floor and walls are made cf cement and should be smooth but not polished. Brass Darts are commonly mass-produced on automated lathes, so the quality and consistency of the machining may vary considerably. To manufacture the blanks for machining tungsten darts, tungsten powder and other metals are blended and bonded by heat and pressure, resulting in a "sintered" material that we refer to as Nickel-Tungsten (or Copper-Tungsten, etc.) Common materials include tungsten, nickel, copper, and iron. Always look for the percentage of tungsten on the package, and buy from a reliable vendor. There are 4 general categories of Tungsten darts. The billets that tungsten darts are made from consist of a variety of metals, including tungsten.

5. During any year there are many Tournaments organised in the world of Pool. This only occurs when there is a metal-to-metal contact, so plastic shafts do not normally need the lock washers. Spinning shafts do nothing to improve the flight of the dart through the air, but they do allow tighter groups by letting the flights align with each other. Dart flights do not generate lift. HARD FLIGHTS are made of a stiff polyester plastic that holds shape well. These dart flights are are very hard to tear. They serve to stabilize the dart during flight and are made of various materials. Materials are usually polycarbonate or nylon, some have replaceable tops for greater longevity. Also, people have different hand and finger sizes, so darts are not one-size-fits-all. If the cue ball or the last object ball remaining on the table obstructs the re-racking of the 14 balls because they block the »triangle«, the following rules are applied.