자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser 2

Protects your vehicle from key cloning and prevents thieves from driving it using your original keys. Our most recent immobiliser is connected to the CAN data network in your vehicle and a unique pin must be entered to start the engine.

In contrast to trackers, local ghost immobiliser installer ghost 2 immobiliser fitting near me Installer (fapset.com) doesn't transmit any radio frequency signals and cannot be detected using diagnostics tools. Ghost doesn't have LED indicators or buttons that could indicate its presence in your van or car.

Anti-key cloning

The ghost immobiliser was designed to stop key cloning and hacking. The device connects to the CAN data network of your vehicle and creates an unique pin code push sequence using the buttons that are factory-installed on your dashboard as well as the steering wheel. This prevents the thief being able to start your vehicle. If the incorrect PIN code is entered, your car will not be started, making it impossible for them to escape with your pride and joy.

Ghost immobilisers employ new technology that is very difficult for thieves to defeat. The ghost immobiliser unlike physical deterrents, like wheel locks and steering lock that can be cut, is a discrete electronic device. It isn't identified by thieves since it does not emit radio signals and functions in a quiet manner.

The next-generation immobiliser protects your car against a variety of threats, including key-hacking relay attacks, key-hacking, and copied copies. It is also able to stop thieves from acquiring an additional key or replacing your ECU, as it will not allow the vehicle to start without entering the correct PIN number first.

The ghost immobiliser 2 unlike other immobilisers, does not require the use of a remote control or key fob to operate. It is able to be deactivated via the driver's mobile using a simple app. This is ideal for those times when you have to hand your car over for valet parking or for servicing without key fobs.

The Autowatch Ghost-II represents the latest version of the Ghost's immobiliser. It is designed to be easy and convenient to use and yet be as secure as possible. This is accomplished by linking the Ghost-II with the vehicle's CAN data network, which means there are no extra wires that can be hidden or easily spotted. It also comes with an inbuilt feature that allows you to disarm the Ghost-II simply by connecting it to the vehicle's Bluetooth.

OBD port hacking

OBD port hacking is the newest method employed by professional auto thieves to steal vehicles. Thieves can gain access to your vehicle's OBD using the help of a laptop, mobile application, and cables that can be bought on the internet for less than PS50. Once they have access, they are able to do anything they like, from resetting your vehicle's fault codes, tuning your vehicle, or getting it stolen in less than a minute.

If you have an Ghost immobiliser fitted it can prevent your car from being stolen with this method by requiring that a unique PIN sequence is entered alongside your key fob in order to start the engine and drive away. It communicates with the vehicle's ECU (Engine Control Unit), using the CAN Data Circuit. This is undetectable by any scanners for RF or code grabbing. It even has a Service/Valet mode which will allow your vehicle to start without the need for a PIN code.

To utilize an OBD hacking device you require a laptop that has software capable of interpreting the OBD protocol, which can be purchased for under PS100 on ebay or Amazon. You will also need a cable with OBD pins that are connected to the CAN bus. These can be purchased on Amazon or Ebay for around PS50. The cable needs to be connected to the wiring harness of your car, such as the radio wiring harness.

Once the hacker has gained a connection to your vehicles OBD port, they will send diagnostics to the system at high baud rates which will crash the CAN, and prevent systems within your vehicle from functioning. This can cause the engine to stop or even lock doors, and even the brakes to engage.

There is no need for additional remotes or key fobs

An immobiliser for your car is a excellent piece of anti-theft technology used by billions of modern vehicles all over the world. An aftermarket immobiliser protects your vehicle by using engine ECU software that prevents cars from starting when an untrue transponder signal is sent.

However, it can be easy for thieves to get around an immobiliser system if they have access to the code that allows them to disable it. A thief could easily remove the battery from most key fobs by removing them. They could then use a simple tool in order to take out the internal circuit board from an immobiliser and replace it with a blank. Then they will be in a position to start your vehicle.

With the TASSA approved Ghost 2 immobiliser, there are no remotes or keys to be purchased. The immobiliser is directly connected to the vehicle's ECU (Engine Control Unit). This is accomplished through a discrete, silent data loop in CAN that cannot be detected by diagnostic tools such as the ones used by high-tech thieves. It doesn't come with a traditional keyfob that has an LED indicators, which means it's not visible.

You may need to deactivate autowatch ghost installation's Ghost 2 automatic protection at times like valet parking or a service job. The ghost CAN immobiliser has a dedicated mode for this, referred to as "Service Mode which is activated by the touch of a button on your phone. The car is still operational, but the maximum speed is restricted to 36 mph.

If you'd like to learn more about the TASSA certified ghost immobiliser, please contact us now to schedule a demonstration at our workshop. A member of our team will provide an in-depth explanation of the system's operation and provide you with owner's manuals, installation certificates, Ghost 2 emergency card and a security guarantee.

Simple PIN code change process

Ghost is a new generation device that can secure your vehicle without cutting wires or adding aftermarket key fobs. It connects directly to the vehicle's CAN data network. A personalised PIN is set by pressing buttons on the dash and steering wheel. The device doesn't emit RF signals, which means it is unable to be manipulated. This makes it inaccessible to sophisticated scans using RF or code-grabbing technologies that modern thieves use.

The PIN code is able to be changed to lock out earlier drivers or include an override code in case you forget the sequence. The installer will show you the process to do this during installation. The system has a valet-mode feature that allows you to temporarily disable pin input sequences, so that your garage or mechanic can work on the vehicle without knowing the code. This is a great option for customers who don't want their PIN sequence to be disclosed, but want to leave their car with valet parking or service.

Unlike Thatcham products which require additional key fobs to operate, ghost installation near me is a discreet system that uses the buttons in your vehicle to create a unique interchangeable PIN code sequence. This sequence is entered through the smartphone application. No extra LED indicators are thrown out, and your vehicle will be protected without any chance of being disabled.

Every vehicle is tested

In contrast to key fobs that require you to press buttons, a ghost immobiliser is hidden under your dash or steering wheel so that only you know it's there. The device is connected to your car's CAN data networks and a personalised PIN code is programmed using buttons that are already present on your car. The system won't allow your car to start until this code is entered. This means that thieves are unable to clone your car's existing keys or access the OBD port to hack your vehicle.

Ghost is a feature that can be found in any vehicle, including electric vehicles, motorhomes, vans and bicycles. It's also incredibly versatile and can be programmed to shut down in various scenarios. For instance, it can be programmed to enter Valet mode when the vehicle is being taken to a valet parking or servicing company. This allows you to drive within the 30mph limit and the ghost immobiliser will turn on itself when your vehicle returns to your possession.

The device can also be reset at anytime to your personal PIN code. This is helpful when you forget the code or the device ceases to function, meaning that it's effectively like new.

It's also important to note that the device is undetectable to anyone who isn't familiar with it. It does this by running through the buttons on your dashboard and steering wheel and then using the information they send in order to identify which button was pressed. This makes it a secure and secure security system that can't be altered by RF scanning or jamming, or door lock pick set.