자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Choosing uPVC Replacement Window Handles

Most customers agree that the replacement of window glass handles made of upvc are easy to install and feel comfortable. However, it's important to know that the type of handle you pick should be appropriate for your window.

The most important aspect is the step height that refers to the space between the nose of the handle to the base or frame. Other factors to consider are lockable styles and mechanisms.

Replacement parts

You can purchase a range of replacement handles made of upvc. There are a variety of styles and colours to choose from, so you're sure to find something that is compatible with the windows you have. It's easy to impulse buy, particularly when the handle breaks so it's a good idea to be patient and examine certain things prior to committing to purchasing a new one. The first thing you should consider is what kind of upvc handle do you currently have and what the difference between types is. The table below shows the most popular handles to help you choose the one that is suitable for your upvc windows.

Espag handles are the most commonly used and are found on most modern double glazed windows. They are typically attached to the frame by two screws that are screwed in from both sides.

The spindle bar in the back could be of different sizes, and can determine if they are left-handed or right-handed. It is essential to know the measurements of the handle you need to ensure you purchase the correct replacement.

Typically fixed by two bolts much like the Espag handle, but they have a low projection from the frame, which means that the handle will not poke through your blinds. This is a great option for those who want the handle to blend with your blinds and upvc windows.

Cockspur handles resemble Espag handles, but they have a nose which closes over a wedge which rests on the frame of the window. This kind of handle is commonly used on older Upvc windows as well as some wooden windows.

Tilt and turn handles are usually found on casement windows and can be operated by turning the handle or pressing at the top of the window. This lets you open the window from inside and clean it from outside without having to climb a ladder or walk across the fence. They are also a great option for people with restricted mobility. They are a great way to improve security and accessibility in the home.

Hints and tips

A lot of people will need to replace their uPVC window handles at some moment. It is essential to know some tips and tricks to make the job easier.

Check what type of handle is at your home. Based on the type of handle it is connected to and the locking mechanism it is using it could be necessary to replace the entire handle and lock. For instance, if shoot bolts (espag) and roller cams are seizing or jammed, you will need to replace them, as well as the handle itself.

Thankfully, most uPVC handles are identical and conform to industry standards for sizes, making replacing them a relatively simple task. First, you must remove the screws on the handles. They are typically pozidrive screws. Once they are removed, you are able to remove the handle.

When you have the handle split it is a good idea to make an inventory of how much of the spindle is protruding from the base of the handle. This will allow you to measure the spindle length for an alternative handle. Simply take note of the length the square peg sticks from the bottom of the handle.

This is particularly important for inline uPVC windows handles, as they are always straight and only open left or right. They aren't able to function in the middle. If you're unsure of the kind of handle you have at home, it can be a good idea to take an existing handle from your neighbour's home and see how it functions to get an idea.

You can also determine the hands of a uPVC window by watching how the handle spins when it is used. Handed handles can be turned clockwise or counter-clockwise. If you're unsure, you can always have someone else open the window with the handle and figure out how it operates in that way.

Measure the spindle

The selection of the right replacement handle for your windows can be a challenge as not all handles are the same size. The spindle is what operates the locking mechanism inside the window. It is crucial to ensure that when installing the new handle, you measure the length of the spindle accurately to ensure that it will fit. There are many different kinds of uPVC Window replacement glass handles, and they operate in different ways, so it is vital to know the type of handle you are using and the type of locking system you have.

Espag handles come with a spindle that extends from the rear of the handle, and is inserted into the lock gearbox within the window frame. When you turn the handle, it will turn the lock inside the gearbox, allowing you to open the window. They are usually used on uPVC casement windows. They can be locked using keys to offer additional security.

Cockspur handles are commonly found in older double-glazed uPVC window frames. They have an "nose" that closes over a wedge-shaped striker block. They are also easy to use and can be locked using keys. It can be more difficult to replace these handles as they are less common than the handles made of espagnolette.

If you have a tilt-and-turn uPVC and you need a replacement window glass near me handle with a different locking mechanism. This will be able to tilt the window open but also turn it around to fully open it. You must make sure that the handle you choose has a length of at least 55mm or it will not be able to penetrate the window frame.

You can use the same procedure to remove and replace this kind of uPVC handle, but you'll need to be cautious when you remove the old one. You may need to open the window a little larger than usual to ensure you get to both screws fixing it to the frame. Once you have put in your new uPVC handle and ensured that it is in the correct position, then you can tighten the screw covers and test the lock to make sure it works correctly.

Install the new handle

Once you have the correct handle replacement, it's going to be easy to screw it into the appropriate position. It will require a screwdriver and an electric one might be easier. When screwing the screws in, it is important not to over tighten the screws, as this can cause the handle to warp or crack.

The second step in installing the handle is to put in the spindle. The spindle is the part that is inserted into the handle to control the locking mechanism of the window. It is essential that the component is properly fitted because this will permit the window to open and shut securely.

There are many different types of uPVC handles. There are several types of uPVC window handles.

Espagnolette Handles are handles inline which can be used to open tilt and turn windows.

Cranked Espagnolette Handles: These are like inline handles but have a curvaceous shape that can be useful for hard-to-reach windows.

Tilt and turn handles These are used to control the opening mechanisms and closing mechanisms on tilt and turn. They also move windows.

The majority of uPVC window frames are equipped with these. In the UK, they are commonly called "Bay Windows".

It can be very frustrating if your uPVC handle breaks. However, there is no need to replace the entire uPVC window because of a broken handle. There are many simple ways to fix and replace a damaged uPVC window handle.

By identifying the kind of window you have, calculating the length of the spindle and buying the replacement handle, you can quickly repair your broken window handle. When working with windows and tools it is crucial to prioritize safety. But this is a fairly simple job. It could mean the difference between having a safe and secure home, or having a window that can be easily opened. Bridgewater glass for windows replacement is the place to go if you're in need of help or need to speak with a specialist regarding replacing your window handle. Our team is experienced and knowledgeable to assist you with any issues.